Download Samsung Odin Flash Tool (All Versions) for Windows | 2023

From this guide, you could download and install the Samsung Odin Flash Tool onto your Windows PC. Samsung devices are known to be active players when it comes to custom development. The support for different AOSP custom ROMs, custom recoveries like TWRP, and custom kernel builds open the floodgates to the plethora of customizations. Furthermore, these Samsung binary files come in different formats, including the BL, AP, CP, CSC [CSC and HOME_CSC], and PIT.

However, you cannot simply flash these files Using Fastboot Commands. Even the TWRP Recovery comes in a TAR format for Samsung, which is again incompatible with the above commands. This is where the Samsung Odin Flash Tool will come in handy. Not only does this tool allows you to carry out the above tweaks, but you could also flash stock firmware and recovery to bring back your device from a boot-looped state. With that said, this guide will help you download and set up this tool on your PC. Follow along for the instructions.

Download Odin for Windows PC

The latest version is Odin 3.14.4. It is recommended that you download the latest Odin tool for your Windows device because the latest update brings bug fixes and stability improvements.

Before Android KitKat, use Odin v3.07 or lower
Odin v3.06	Download Link
Odin v3.07	Download Link
After Android KitKat and Jelly Bean use Odin v3.09 or higher
Odin v3.09	Download Link
Odin v3.10.0	Download Link
Odin v3.10.5	Download Link
Odin v3.10.6	Download Link
Odin v3.10.7	Download Link
After Android 6.0 Marshmallow, use  Odin v3.11.1 or higher
Odin v3.11.1	Download Link
Odin v3.11.2	Download Link
Odin v3.12.3	Download Link
Odin v3.12.4	Download Link
Odin v3.12.5	Download Link
Odin v3.12.7	Download Link
Odin v3.12.10	Download Link
After Android 9.0 Pie, use Odin v3.13.1 or higher
Odin v3.13.1	Download Link
For newer devices like Galaxy Note 10/S10/S20 Series Odin v3.13.3
Odin v3.13.3	Download Link
After Android 10 Q, use Odin v3.14.1 or higher
Odin v3.14.1	Download Link
Odin v3.14.4	Download Link
Odin Multi Downloader
Odin Downloader v4.44	Download Link

Note:

This is the latest version of Odin and it was released in January of 2016. It fixes the error of flashing for the Galaxy S7/S7e USA model (AT&T, T-mobile) and is supported by the new models of 2016, such as Galaxy S7, S7 Edge, Note 6, and Note 7. For newer models like Galaxy Note 10/S10/S20 Series, you must use Odin v3.13.3 or higher. For Android 10, you need to use Odin v3.14.1 or higher.

How to Install Odin Flash Tool on Windows PC

Pre-requisites

• You need to make sure to download and install the latest Samsung USB Drivers on your PC.
• Odin tool only supports flashing firmware and files on Samsung Android devices.
• The tool works on Windows 10, 8.1, 8, 7, XP PCs.
• While using the tool, make sure that the Samsung Kies software is not running or interrupting the process.
• To install the firmware, you must download the stock firmware for your device. You can also use SamFirm Tool to download the latest stock firmware for your Galaxy device.
• To install the firmware, you must download the stock firmware for your device. You can also use SamFirm Tool to download the latest stock firmware for your Galaxy device.
1. Firstly, download the Odin tool zip from the above download sectio
2. 
   
3. 
4. 1. Now, extract the downloaded file on your PC using an archive tool like Winrar.
   2. Open the folder of the Odin tool.
   3. If you find a warning msg, click OK to continue.
      
      
      
   4. That’s it; now you will see ODIN software on your Windows PC

      

      
      

   I hope you have successfully downloaded and installed the ODIN firmware on your windows PC. To flash the firmware using ODIN, You can follow our guide on how to flash Samsung firmware using the ODIN tool. If you have not downloaded the Samsung firmware, you can use either of the tools to download the latest firmware for your device.